Schneider, Charge Controller, Xantrex, MPPT Type, 60A, 150Vdc, RNW86510301

Description

Free shipping is for the contiguous United States only.
Schneider Electric
Conext MPPT 60 150
Solar Charge Controller
The
Conext MPPT 60 150
is a photovoltaic (PV) charge controller that tracks the maximum power point of a PV array to deliver the maximum available current for charging batteries. When charging, the MPPT 60 150 regulates battery voltage and output current based on the amount of energy available from the PV array and state-of-charge of the battery.
The
Conext MPPT 60 150
can be used with 12, 24, 36, 48, and 60-volt DC battery systems and is able to charge a lower nominal-voltage battery from a higher nominal-voltage array. For example, it can charge a 12-volt battery from a 36-volt array. This provides flexibility for installers to use longer wiring runs without compromising efficiency. The Conext Solar Charge Controller can be installed (in single or multi-unit configurations) with Conext XW Plus Inverter/Charger(s) or can be used in other solar energy systems where a solar charge controller is needed.
The
Conext MPPT 60 150
incorporates a dynamic Maximum Power Point Tracking (MPPT) algorithm designed to maximize energy harvest from the PV array. The MPPT constantly adjusts the operating points of the array to ensure it stays on the maximum power point. It does not stop energy harvest to sweep the array like some other competing products. This feature is beneficial all sunlight conditions, especially in areas with fast moving cloud cover and quickly changing solar conditions.
Features:
Maximum Power Point Tracking (MPPT) delivers maximum available power from PV array to battery bank
Integrated PV ground-fault protection
Ultra-reliable, convection-cooled design does not require a cooling fan − large, aluminum, die-cast heat-sink allows full output current up to 45°C without thermal derating
Selectable two or three-stage charging algorithms with manual equalization to maximize system performance and improve battery life
Configurable auxiliary output
Two-line, 16-character liquid crystal display (LCD) and four buttons for configuration and system monitoring
Input over-voltage and under-voltage protection, output over-current protection, and backfeed (reverse current) protection (warning and fault messages appear on LCD when unit shuts down as a protective measure)
Over-temperature protection and power derating when output power and ambient temperature are high
Battery Temperature Sensor (BTS) included − automatically provides temperaturecompensated battery charging
Xanbus™-enabled network communications protocol (developed by Xantrex)
Communicates settings and activity to other Xanbus™-enabled devices, such as the XW Hybrid Inverter/Charger, the XW System Control Panel (XW SCP), XW Automatic Generator Start (XW AGS), and other XW Solar Charge Controllers.
Five-year warranty
Specifications
Electrical Specifications
Nominal battery voltage
12, 24, 36, 48, 60 Vdc
Maximum PV array voltage (operating)
140 Vdc
Maximum PV array open circuit voltage
150 Vdc
Array short-circuit current
60 Adc maximum
Maximum and minimum wire size in conduit
#6 AWG to #14 AWG
Total power consumption while operating
2.5 W (tare)
Charger regulation method:
Three-stage (bulk, absorption, float)
Two-stage (bulk, absorption)
Mechanical Specifications
Dimensions (H × W × D)
14 ½ × 5 ¾ × 5 ½” (368 × 146 × 138 mm)
Weight (Controller only)
10.75 lb (4.8 kg)
Weight (shipping)
17.6 lb (8 kg)
Shipping dimensions (H × W × D)
19 × 9 × 9 ¾” (483 × 229 × 350 mm)
Mounting
Vertical wall mount
Standard warranty
Five years
Part number
865-1030
Environmental Specifications
Enclosure type
Indoor, ventilated, sheet metal chassis with 7/8”and 1”
(22.22 mm and 27.76 mm) knockouts and aluminum heat-sink
Operating temperature range (full power)
-4 to 113 °F (-20 to +45 °C)
Storage temperature
-40 to 185 °F (-40 to +85 °C)
Altitude limit (operating)
Sea level to 15,000 feet (4572 m) @ 15 °C
Optional Accessories
XW System Control Panel
865-1050
XW Automatic Generator Start
865-1060
Network cables:
3 feet (0.9 m)
809-0935
10 feet (3.0 m)
809-0938
Network terminators:
Male (two per pack): 809-0901
Female (two per pack): 809-0905
Regulatory Approvals
Certified to UL 1741 1st Edition and to CSA 107.1-01 and carries the c(CSA)us mark
Specifications subject to change without notice.
Everyoneshouse Profile.
I recently sold my successful solar company that I created around 1992 in the state of Maine.
My solar experience in site surveys, design, installations, and maintenance of 300 plus clients, specializing in off grid homes, and owning my own off grid home.
Solar is part of my life and the bonus of meeting so many different client’s needs, remains my quest to see more people enjoy their home with solar.
I have taken advantage of my suppliers for the last 25 years to give you the best price I possibly can.
If you don’t find what you need on my site, please tell me what you need and I will do my best to get it for you.
If you are new to solar and need help, feel free to reach out to me.
I will be more than happy to design a system for your needs.
I normally ship within two days of receiving payment, however if your item is not readily available I will inform you immediately and make the necessary required changes.
Sincerely
John Myatt
Contact me at 207.280.0625 with your questions