CRL Antique Brass Geneva 037 Series Wall Mount Full Back Plate Hinge GEN037ABR

Description

Self-Centering with Reversible 5 Degree Pivot Pin
Use Monolithic Tempered Glass
Wall Mount Full Back Plate Standard Model (Factory Set for Standard Closing Position)
The
CRL Geneva Series
of professional Hinges is able to accommodate 5/16" (8 mm) to 1/2" (12 mm) glass. Geneva Hinges are self-centering and contain a Reversible 5 Degree Pivot Pin. Made of solid brass with all moving parts (pins and springs) in stainless steel.
Standard Reversible Pivot Pin:
Each Geneva Hinge contains a Reversible Pivot Pin. One side of the Pin is marked 90 Degrees. The opposite side is marked 85 Degrees. Standard Geneva Hinges come with the 90 Degrees side activated.
Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).
Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).
SPECIFICATIONS:
Glass Thickness:
5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass
Construction:
Solid Brass
Hinge Swings:
90 degree in and 90 degree Out
Closing Type:
Self-Centering when within 15 degree of Closed Position
Cut-Out Required Includes:
Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. GEN13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.