AC Repair Kit, Refrigeration, Air Conditioning Home AC Maintenance Repair KIT

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
AC Repair Kit, Refrigeration, Air Conditioning Home AC Maintenance Repair KIT
R-22 Charging Kit
For any refrigeration or air conditioning system containing refrigerant R-22.
Refrigerant R-22 is used in ,
Air-Conditioners
Coolers and Freezers
Some appliances
R-22 Recharge Kit with "IN-LINE" TEST GAUGE and Charging hose.
This "TOP-MOUNT" can taper with gauge and Hose will also fit the R12 cans.
Includes;
One (1) Large 24 oz. Can of R-22 Refrigerant.
Top Mount Can taper with "IN-LINE" "CHECK AND CHARGE-IT" gauge and nice long 36" charging hose!
You will also get a separate screw-on can taper for the Envirosafe cans the Pro Dry & Pro Seal.
Gauge Range: -30" to 350 psi.
Temperature/Pressure range for; R22
(1) Can of Pro-Seal,  "Leak Stop"
Pro Seal is designed for repairing leaks in condensers, evaporators, copper line, and solder joints.
This product is an epoxy that reacts to water and air.
When coming in contact with the atmosphere, it forms a seal over the leak.
If your system stays charged for one day when running, this product will fix most leaks that you may encounter.
If there is air and water in your system, pull a deep vac on the system and boil moisture out of the system.
In most cases, if a system has not leaked below 15 psi, there is typically not air or moisture in the system. The system has greater pressure than what the atmospheric pressure is and cannot leak unless the system is below 15 degrees.
Save on costly repairs, use ProSeal.
Made for large systems (5 ton A/C's)
Note:  A/C unit must be in operational condition and running before Pro Seal can be installed (if system has leaked down to zero, you must also use Pro Dry XL4.
Directions:
1.  Install can to can tap (raise piercing valve so it does NOT pierce can)
2.  connect other end to A/C unit (low pressure port -- big line)
3.  Turn on A/C unit
4.  Pierce can.  Open valve slowly with can upside down.
5.  When can is empty, change can and continue charging with refrigerant until you reach manufacturer's pressure specs.
(1) Can of Pro-Dry
*Ideal to use in recharging an R22 Home A/C system.
Removes moisture to protect from system failure due to corrosion since moisture robs a system of cooling capacity
Prevents Corrosion
Treats 1 1/2 - 5 ton units
Use with Pro-Seal  to protect sealants from reacting in system.
Should be used on any home A/C system that has leaked below 15 psi (running or not running) OR  If the system has ever leaked in the past below 15 psi.  If you do not wish to use Pro Dry, the system must be vacuumed prior to installing Pro Seal.
*When put into an A/C system that has moisture or air, Pro Dry  mixes with the moisture and air in system forming a synthetic oil which then mixes with the oil in the system
Can be used on any Air Conditioning, Refrigeration or Heat Pump system that use's R-22 REFRIGERANT.
R-22
Also for R22 Heat Pump systems.
This kit includes a Can taper with "in-line gauge" , a nice long 36" charging hose.
The hose connection is 1/4" Female swivel flare nut with the valve core depressor!
****FOR USE BY QUALIFIED TECHNICIANS WITH APPROPRIATE INFORMATION MANUALS.
USE ONLY IN AIR CONDITIONING OR REFRIGERATION SYSTEMS DESIGNED FOR R22.
DO NOT MIX WITH ANY OTHER REFRIGERANT.
Before purchasing these items, be sure you fall into one of the categories  or guidelines listed below.
·         The buyer has to be EPA-certified.
·         The buyer has to show proof of certification before paying and before the item is shipped.
*You must be EPA certified to purchase this product and show proof of certification before the item will be shipped.*You have to be certified by the Environmental Protection Agency (EPA), Section 608 or Section 609. *You have to show proof of certification before paying and before the items can be shipped.
·
·
Refrigerant 22 is being phased out by the EPA are extremely limited causing prices to rise.
·
·
You should consider buying now while you still can! This is genuine R22 with no additives.
·
·
·
A EPA certificate is required to purchase R22 Refrigerants or a statement saying you are purchasing this for "Resale Only". The statement can be in the form of an e-mail.
·
·
Most home A/C use R22 refrigerant. Check specs on A/C for refrigerant type before ordering.
An EPA certificate is required to purchase R22
Refrigerant  "OR" a statement saying you are
purchasing this for "Resale Only".
The "Resale Only"
statement can be in the form
of an e-mail.
This listing is for an EPA regulated refrigerant, which may only be sold on our eBay community with the following disclaimer;
In order to purchase this item; You must be certified by the Environmental Protection Agency (EPA), under Section 608 or Section 609 of the United States Clean Air Act and as a result of the Montreal Protocol Established on September 15th, 1987.
You must show proof of certification before paying and before the item is shipped. Merely stating that you are "EPA certified", is not enough to satisfy these requirements.
*If you are a wholesaler and you are selling to a buyer who will resell the item to a certified buyer, you must state that you will keep sufficient records to establish that the purchaser of the refrigerant is going to resell it to certified technicians.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both The United States and Canada shipments.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required per United States Department Of Transportation CFR Title 49 Shipping regulations.
UPS Ground Only!
This item requires a "ADULT SIGNATURE"!
R-22 Charging Kit For any refrigeration or air conditioning system containing refrigerant R-22. Refrigerant R-22 is used in , Air-Conditioners Coolers and Freezers Some appliances R-22 Recharge Kit with "IN-LINE" TEST GAUGE and Charging hose. This "TOP-MOUNT" can taper with gauge and Hose will also fit the R12 cans. Includes; One (1) Large 24 oz. Can of R-22 Refrigerant. Top Mount Can taper with "IN-LINE" "CHECK AND CHARGE-IT" gauge and nice long 36" charging hose! You will also get a separate screw-on can taper for the Envirosafe cans the Pro Dry & Pro Seal. Gauge Range: -30" to 350 psi. Temperature/Pressure range for; R22 (1) Can of Pro-Seal, "Leak Stop" Pro Seal is designed for repairing leaks in condensers, evaporators, copper line, and solder joints. This product is an epoxy that reacts to water and air. When coming in contact with the atmosphere, it forms a seal over the leak. If your system stays charged for one day when running, this product will fix most leaks that you may encounter. If there is air and water in your system, pull a deep vac on the system and boil moisture out of the system. In most cases, if a system has not leaked below 15 psi, there is typically not air or moisture in the system. The system has greater pressure than what the atmospheric pressure is and cannot leak unless the system is below 15 degrees. Save on costly repairs, use ProSeal. Made for large systems (5 ton A/C's) Note: A/C unit must be in operational condition and running before Pro Seal can be installed (if system has leaked down to zero, you must also use Pro Dry XL4. Directions: 1. Install can to can tap (raise piercing valve so it does NOT pierce can) 2. connect other end to A/C unit (low pressure port -- big line) 3. Turn on A/C unit 4. Pierce can. Open valve slowly with can upside down. 5. When can is empty, change can and continue charging with refrigerant until you reach manufacturer's pressure specs. (1) Can of Pro-Dry *Ideal to use in recharging an R22 Home A/C system. ---Removes moisture to protect from system failure due to corrosion since moisture robs a system of cooling capacity ---Prevents Corrosion ---Treats 1 1/2 - 5 ton units ---Use with Pro-Seal to protect sealants from reacting in system. Should be used on any home A/C system that has leaked below 15 psi (running or not running) OR If the system has ever leaked in the past below 15 psi. If you do not wish to use Pro Dry, the system must be vacuumed prior to installing Pro Seal. *When put into an A/C system that has moisture or air, Pro Dry mixes with the moisture and air in system forming a synthetic oil which then mixes with the oil in the system Can be used on any Air Conditioning, Refrigeration or Heat Pump system that use's R-22 REFRIGERANT. R-22 Also for R22 Heat Pump systems. This kit includes a Can taper with "in-line gauge" , a nice long 36" charging hose. The hose connection is 1/4" Female swivel flare nut with the valve core depressor! ****FOR USE BY QUALIFIED TECHNICIANS WITH APPROPRIATE INFORMATION MANUALS. USE ONLY IN AIR CONDITIONING OR REFRIGERATION SYSTEMS DESIGNED FOR R22. DO NOT MIX WITH ANY OTHER REFRIGERANT. Before purchasing these items, be sure you fall into one of the categories or guidelines listed below. · The buyer has to be EPA-certified. · The buyer has to show proof of certification before paying and before the item is shipped. *You must be EPA certified to purchase this product and show proof of certification before the item will be shipped.*You have to be certified by the Environmental Protection Agency (EPA), Section 608 or Section 609. *You have to show proof of certification before paying and before the items can be shipped. · · Refrigerant 22 is being phased out by the EPA are extremely limited causing prices to rise. · · You should consider buying now while you still can! This is genuine R22 with no additives. · · · A EPA certificate is required to purchase R22 Refrigerants or a statement saying you are purchasing this for "Resale Only". The statement can be in the form of an e-mail. · · Most home A/C use R22 refrigerant. Check specs on A/C for refrigerant type before ordering. An EPA certificate is required to purchase R22 Refrigerant "OR" a statement saying you are purchasing this for "Resale Only". The "Resale Only" statement can be in the form of an e-mail.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
AC Repair Kit, Refrigeration, Air Conditioning Home AC Maintenance Repair KIT
R-22 Charging Kit
For any refrigeration or air conditioning system containing refrigerant R-22.
Refrigerant R-22 is used in ,
Air-Conditioners
Coolers and Freezers
Some appliances
R-22 Recharge Kit with "IN-LINE" TEST GAUGE and Charging hose.
This "TOP-MOUNT" can taper with gauge and Hose will also fit the R12 cans.
Includes;
One (1) Large 24 oz. Can of R-22 Refrigerant.
Top Mount Can taper with "IN-LINE" "CHECK AND CHARGE-IT" gauge and nice long 36" charging hose!
You will also get a separate screw-on can taper for the Envirosafe cans the Pro Dry & Pro Seal.
Gauge Range: -30" to 350 psi.
Temperature/Pressure range for; R22
(1) Can of Pro-Seal,  "Leak Stop"
Pro Seal is designed for repairing leaks in condensers, evaporators, copper line, and solder joints.
This product is an epoxy that reacts to water and air.
When coming in contact with the atmosphere, it forms a seal over the leak.
If your system stays charged for one day when running, this product will fix most leaks that you may encounter.
If there is air and water in your system, pull a deep vac on the system and boil moisture out of the system.
In most cases, if a system has not leaked below 15 psi, there is typically not air or moisture in the system. The system has greater pressure than what the atmospheric pressure is and cannot leak unless the system is below 15 degrees.
Save on costly repairs, use ProSeal.
Made for large systems (5 ton A/C's)
Note:  A/C unit must be in operational condition and running before Pro Seal can be installed (if system has leaked down to zero, you must also use Pro Dry XL4.
Directions:
1.  Install can to can tap (raise piercing valve so it does NOT pierce can)
2.  connect other end to A/C unit (low pressure port -- big line)
3.  Turn on A/C unit
4.  Pierce can.  Open valve slowly with can upside down.
5.  When can is empty, change can and continue charging with refrigerant until you reach manufacturer's pressure specs.
(1) Can of Pro-Dry
*Ideal to use in recharging an R22 Home A/C system.
Removes moisture to protect from system failure due to corrosion since moisture robs a system of cooling capacity
Prevents Corrosion
Treats 1 1/2 - 5 ton units
Use with Pro-Seal  to protect sealants from reacting in system.
Should be used on any home A/C system that has leaked below 15 psi (running or not running) OR  If the system has ever leaked in the past below 15 psi.  If you do not wish to use Pro Dry, the system must be vacuumed prior to installing Pro Seal.
*When put into an A/C system that has moisture or air, Pro Dry  mixes with the moisture and air in system forming a synthetic oil which then mixes with the oil in the system
Can be used on any Air Conditioning, Refrigeration or Heat Pump system that use's R-22 REFRIGERANT.
R-22
Also for R22 Heat Pump systems.
This kit includes a Can taper with "in-line gauge" , a nice long 36" charging hose.
The hose connection is 1/4" Female swivel flare nut with the valve core depressor!
****FOR USE BY QUALIFIED TECHNICIANS WITH APPROPRIATE INFORMATION MANUALS.
USE ONLY IN AIR CONDITIONING OR REFRIGERATION SYSTEMS DESIGNED FOR R22.
DO NOT MIX WITH ANY OTHER REFRIGERANT.
Before purchasing these items, be sure you fall into one of the categories  or guidelines listed below.
·         The buyer has to be EPA-certified.
·         The buyer has to show proof of certification before paying and before the item is shipped.
*You must be EPA certified to purchase this product and show proof of certification before the item will be shipped.*You have to be certified by the Environmental Protection Agency (EPA), Section 608 or Section 609. *You have to show proof of certification before paying and before the items can be shipped.
·
·
Refrigerant 22 is being phased out by the EPA are extremely limited causing prices to rise.
·
·
You should consider buying now while you still can! This is genuine R22 with no additives.
·
·
·
A EPA certificate is required to purchase R22 Refrigerants or a statement saying you are purchasing this for "Resale Only". The statement can be in the form of an e-mail.
·
·
Most home A/C use R22 refrigerant. Check specs on A/C for refrigerant type before ordering.
An EPA certificate is required to purchase R22
Refrigerant  "OR" a statement saying you are
purchasing this for "Resale Only".
The "Resale Only"
statement can be in the form
of an e-mail.
This listing is for an EPA regulated refrigerant, which may only be sold on our eBay community with the following disclaimer;
In order to purchase this item; You must be certified by the Environmental Protection Agency (EPA), under Section 608 or Section 609 of the United States Clean Air Act and as a result of the Montreal Protocol Established on September 15th, 1987.
You must show proof of certification before paying and before the item is shipped. Merely stating that you are "EPA certified", is not enough to satisfy these requirements.
*If you are a wholesaler and you are selling to a buyer who will resell the item to a certified buyer, you must state that you will keep sufficient records to establish that the purchaser of the refrigerant is going to resell it to certified technicians.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both The United States and Canada shipments.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required per United States Department Of Transportation CFR Title 49 Shipping regulations.
UPS Ground Only!
This item requires a "ADULT SIGNATURE"!
R-22 Charging Kit
For any refrigeration or air conditioning system containing refrigerant R-22.
Refrigerant R-22 is used in ,
Air-Conditioners
Coolers and Freezers
Some appliances
R-22 Recharge Kit with "IN-LINE" TEST GAUGE and Charging hose.
This "TOP-MOUNT" can taper with gauge and Hose will also fit the R12 cans.
Includes;
One (1) Large 24 oz. Can of R-22 Refrigerant.
Top Mount Can taper with "IN-LINE" "CHECK AND CHARGE-IT" gauge and nice long 36" charging hose!
You will also get a separate screw-on can taper for the Envirosafe cans the Pro Dry & Pro Seal.
Gauge Range: -30" to 350 psi.
Temperature/Pressure range for; R22
(1) Can of Pro-Seal,  "Leak Stop"
Pro Seal is designed for repairing leaks in condensers, evaporators, copper line, and solder joints.
This product is an epoxy that reacts to water and air.
When coming in contact with the atmosphere, it forms a seal over the leak.
If your system stays charged for one day when running, this product will fix most leaks that you may encounter.
If there is air and water in your system, pull a deep vac on the system and boil moisture out of the system.
In most cases, if a system has not leaked below 15 psi, there is typically not air or moisture in the system. The system has greater pressure than what the atmospheric pressure is and cannot leak unless the system is below 15 degrees.
Save on costly repairs, use ProSeal.
Made for large systems (5 ton A/C's)
Note:  A/C unit must be in operational condition and running before Pro Seal can be installed (if system has leaked down to zero, you must also use Pro Dry XL4.
Directions:
1.  Install can to can tap (raise piercing valve so it does NOT pierce can)
2.  connect other end to A/C unit (low pressure port -- big line)
3.  Turn on A/C unit
4.  Pierce can.  Open valve slowly with can upside down.
5.  When can is empty, change can and continue charging with refrigerant until you reach manufacturer's pressure specs.
(1) Can of Pro-Dry
*Ideal to use in recharging an R22 Home A/C system.
Removes moisture to protect from system failure due to corrosion since moisture robs a system of cooling capacity
Prevents Corrosion
Treats 1 1/2 - 5 ton units
Use with Pro-Seal  to protect sealants from reacting in system.
Should be used on any home A/C system that has leaked below 15 psi (running or not running) OR  If the system has ever leaked in the past below 15 psi.  If you do not wish to use Pro Dry, the system must be vacuumed prior to installing Pro Seal.
*When put into an A/C system that has moisture or air, Pro Dry  mixes with the moisture and air in system forming a synthetic oil which then mixes with the oil in the system
Can be used on any Air Conditioning, Refrigeration or Heat Pump system that use's R-22 REFRIGERANT.
R-22
Also for R22 Heat Pump systems.
This kit includes a Can taper with "in-line gauge" , a nice long 36" charging hose.
The hose connection is 1/4" Female swivel flare nut with the valve core depressor!
****FOR USE BY QUALIFIED TECHNICIANS WITH APPROPRIATE INFORMATION MANUALS.
USE ONLY IN AIR CONDITIONING OR REFRIGERATION SYSTEMS DESIGNED FOR R22.
DO NOT MIX WITH ANY OTHER REFRIGERANT.
Before purchasing these items, be sure you fall into one of the categories  or guidelines listed below.
·         The buyer has to be EPA-certified.
·         The buyer has to show proof of certification before paying and before the item is shipped.
*You must be EPA certified to purchase this product and show proof of certification before the item will be shipped.*You have to be certified by the Environmental Protection Agency (EPA), Section 608 or Section 609. *You have to show proof of certification before paying and before the items can be shipped.
·
·
Refrigerant 22 is being phased out by the EPA are extremely limited causing prices to rise.
·
·
You should consider buying now while you still can! This is genuine R22 with no additives.
·
·
·
A EPA certificate is required to purchase R22 Refrigerants or a statement saying you are purchasing this for "Resale Only". The statement can be in the form of an e-mail.
·
·
Most home A/C use R22 refrigerant. Check specs on A/C for refrigerant type before ordering.
An EPA certificate is required to purchase R22
Refrigerant  "OR" a statement saying you are
purchasing this for "Resale Only".
The "Resale Only"
statement can be in the form
of an e-mail.