100 Feet M22529/2-6R-100 Mil-Spec Spring Fast Composite Grommet Edging 0.134"

Description

This sale is for
100 Feet Device Technologies M22529/2-6R-100 Mil-Spec
Spring Fast Composite Grommet Edging 0.134" Sheet thickness / 0.24" width.
NEW OLD STOCK SURPLUS!  AKA
BT6-0100-ER0602
PER MANUFACTURER:
Spring-Fast® Composite Grommet Edging covers sharp edges of panels that come in contact
with witre and cables and mechanically lock on indefinitely with finger pressure in only seconds
per foot. They provide a significant time reduction in assemblies. A long-term reliability solution
that replaces nylon caterpillar plastic gromments and associated solvents, adhesives, and ancillary
materials to protect critical equipment from failure due to wire chaffing.
Spring-Fast® Grommet Edging is approved by the FAA and U.S. Department of Defense per
NASM 22529/a and NASM 22529/2 for all aircraft applications. Meets FAR 25.853 for flammability
and MIL 1344 for shock and vibration. Use Spring-Fast® BAP and SL series for flanged lightning hole
and three-axis contours. The BAP Series Flexi-Grommet is perfect for roll formed edges and small
lightening holes. Where wires are routed in the same plain as the sheet metal, the Spring-Fast® SL
Series provides a trim characteristic for all edges with or  without cabling nearby.
Spring-Fast® is used in a wide variety of aviation and aerospace applications:
• Lightening Holes
• Wing Sections
• Seating
• Intercostals
• Fuselage
• Avionics
• Bulkheads
• Air Traffic Control
• Racks • Tail Sections
• Tactical Satellite Emulators
• Ferrules
• Navigation Systems
• Electrical Power Centers
• Ground Control
• EAU (Electrical Avionic Units)
• PSU (Personal Safety Units)
• APU (Auxiliary Power Units)
• IFE (In-Flight Entertainment)
SOLD WITH A 30 DAY RIGHT OF INSPECTION!
This item is NOT FOR EXPORT.  U.S. SALES ONLY.
35328
/1123/4/10*10*3/dr