1 Qty TEMCo 25ft Solar Panel Extension Connector 12 AWG PV Cable Wire

Description

Visit Our Store
Solar Connector Extensions
TEMCo ID:
CPV067
Quantity:
1 (1 length of 25ft)
Warranty:
Lifetime Warranty
Connectors
Rated voltage:
1000 V
Rated current:
25A - 14 AWG (2.5mm²), 30A - 12 and 10 AWG (4mm²,6mm²)
Test voltage:
6 kV (50 Hz)
Insulation material:
PC/PA
Contact material:
Copper, silver-plated
Operating temperature:
-40°C ~ 85°C
Approvals:
IP 67 Protection Grade, Safety class II, Flame class UL94-V0
Contact resistance:
≤5mΩ
Insertion / withdrawal force:
≤50N / ≥50N
Locking system:
Snap in
Wire
Conductor size:
12 AWG
Length:
25 ft
Feet per pound:
26.18
Nominal outside diameter (in.):
0.209
Conductor stranding:
19 / 0.0185
Conductor material:
Bare copper
Insulation material:
Cross linked Polyethylene (XLP)
Max. amps per conductor:
31 A
Max. voltage:
600 V
Temperature rating:
-40°C to 90°C
Approvals:
Type USE-2 per UL 854, RHH/RHW-2 per UL 44, Type PV per UL 4703
Applications:
Solar panels, DC circuits, inverter wiring
data sheet
Download the full specs.
Warranty
Download our lifetime warranty.
Dimensional Diagram
DIMENSIONS IN INCHES.
Free Shipping
To Lower 48 States
UL 4703 Cable vs. Other Types of Cable
What makes UL 4703 a better choice than some other common cable ratings, such as THHN or USE-2?
Overview
The term "PV wire" (photovoltaic wire) is often used to refer to USE-2 or THHN wire, the terms are not interchangeable. PV wire is specifically rated in accordance with UL 4703. THHN wire is used as general building wire and lacks the construction and strength of specialized cables designated as UL 4703 or USE-2. Using THHN cable in place of either UL 4703 or USE-2 will result in failures.
Though USE-2 wire is impact and crush resistant, UL 4703 rated cable is superior to USE-2 in regards to low temperature flexibility, sunlight resistance, and flame resistance. PV wire for solar panels also has a thicker jacket and insulation than USE-2 wire. USE-2 cable is used in grounded PV systems only, which UL 4703 cable can be used for both grounded and ungrounded arrays.
View the quick comparison chart below for an overview.
Applications
Per the National Electrical Code, USE-2 wire is suitable for use in grounded PV arrays only. UL 4703 cable can be used within both
grounded and ungrounded
PV arrays. THHN cable is used as general building wire and cannot replace USE-2 or UL 4703 cable.
Temperature Rating
PV cable is rated for 90°C in wet conditions and up to 150°C in dry conditions. USE-2 is rated for 90°C in both wet and dry conditions. THHN cable is rated at 75°C in wet conditions and 90°C in dry conditions.
Voltage
PV wire can be rated for 600 V, 1000 V, or 2000 V. THHN and USE-2 wire are only rated for 600 V.
Flexibility
PV wire is made up of stranded copper conductors, which makes it flexible. USE-2 wire is usually installed in locations where it is not subject to movement or mechanical damage, so they can use either solid or stranded conductors made of copper, copper-clad aluminum, or aluminum, making it less flexible than PV wire.
Insulation and Jacket
Both PV and USE-2 cable use thermoset insulation and jacket, typically XLPE (cross-linked polyethylene) or EPCV.
Testing Requirements
USE-2 cable is usually installed underground where it will likely not encounter flames, while PV wire can be exposed in an installation, so flames tests are required only for PV wire. Overload and mechanical abuse tests (including crushing and impact resistance) are applicable only to USE-2 cable.
PV wire must pass more stringent testing requirements for sunlight resistance and low temperature flexibility. It undergoes a 720 hour weatherometer and a -40ºC cold chamber conditioning. In contrast, the requirements for USE-2 cable are 300-hour weatherometer and -25ºC cold chamber conditioning.
UL 4703
(PV Wire)
Applications:
Wiring solar panels. Underground service entrance wire for both grounded and ungrounded PV arrays. General purpose wiring for installation in conduit.
Min. conductor size:
18 AWG
Insulation:
Cross-linked Polyethylene (XLP)
Jacket:
May or may not have jacket
Temp rating:
90°C Wet, 150°C Dry
Max Voltage:
600, 1000, or 2000 V
Resistant to:
Sunlight, ozone, UV, flame, moisture
Flexibility at low temperatures:
Higher
Standards:
Type USE-2 per UL 854
RHH/RHW-2 per UL 44
Type PV per UL 4703
THHN
(Building Wire)
Applications:
General purpose wiring
for installation in conduit. May also be used in machine tool, appliance and control circuit wiring. Cannot replace PV or
USE-2 if standards require it.
Min. conductor size:
14 AWG
Insulation:
Polyvinylchloride (PVC)
Jacket:
Nylon
Temp rating:
75°C Oil, 75°C Wet, 90° Dry
Max Voltage:
600 V
Resistant to:
Gasoline and oil
Flexibility at low temperatures:
Lower
Standards:
UL 83 & 1063 as Type THHN Wire 90°C in dry locations.
Type THWN Wire 75°C in wet locations.
A-A-59544, NEMA WC-5, UL-758
USE-2
(RHH/RHW Wire)
Applications:
Aerial, raceway, or direct
burial. For connecting PV modules. Grounded PV arrays only.
Min. conductor size:
14 AWG
Insulation:
Cross-linked Polyethylene (XLP)
Jacket:
May or may not have jacket
Temp rating:
90°C Wet and Dry
Max Voltage:
600 V
Resistant to:
Crushing and impact, sunlight
Flexibility at low temperatures:
Lower
Standards:
UL 44 for rubber covered wire.
UL 854 for service entrance cable.
Federal Govt. Specificiation J-C-30A, ASTM-B-3 (solid copper conductors), ASTM-B-3 and 6 (standard conductors)
Features
HIGH UV Resistance.
Won't degrade in sunlight.
Waterproof.
O-Ring connector and cable gland provide IP67 rating.
Ultra-Low Contact Resistance.
Unique spring membrane contact surface in terminal.
Lifetime warranty.
Don't choose a product that will degrade or fail before your panels do.
Precision snug mating fit.
High tolerance dies are used in the molding process.
Silver-plated Copper Terminals
outlast and outperform tin-plated models.
Get it FAST.
Most orders received in 2 to 5 days.
Our return policy.
If you don't like it, we'll take it back and pay the shipping!
Other Solar Hardware & Tools
Connectors
Y  Branch Connectors
FFFM & MMMF Connectors
Rigid T splitters
panel connectors
Connector extensions
Solar wire crimper
Solar wire
connector wrenches
.75 & FREE SHIPPING
Welding & Battery cable
‍USA Made 6 AWG to 4/0 Cable
Battery cable LINKS for inverters
6 AWG to 4/0, Various Hole Sizes
Other Lengths & gauges
10 AWG Extensions
12 AWG Extensions
Electrician's tools
TH0001
HD Cable Cutter
.49
Cuts up to 4/0
Forged blades
12" Handles
TH0002
HD Cable Cutter

Cuts up to 500 MCM
Forged blades
12" Handles
TH0003
HD Cable Cutter

Cuts up to 750 MCM
Forged blades
12" Handles
TH0004
Hydraulic Knockout Punch

1/2" to 2 " Punch Set
9 US Tons
5 Year Warranty
TH0005
Hydraulic Cable Crimper

6 AWG to 600 MCM (CU)
11 Ton Crimping Force
12 Die Sets
TH0006
Hydraulic Cable Crimper

12 to 00 (2/0) AWG (CU)
5 Ton Crimping Force
12 Die Sets
TH0007
Hammer Indent Crimper

8 to 0000 (4/0) AWG (CU)
Universal Indent Die
5 Year Warranty
TH0012
Dieless Indent Crimper

8 to 0000 (4/0) AWG (CU)
Universal Indent Die
5 Year Warranty
TH0020
Dieless Indent Crimper

10 AWG - 400 MCM
Universal Indent Die
5 Year Warranty
TH0021
Sheet Metal Stud Punch
5
3 Die Sets
20 GA, 0.393" (1mm) Mild Steel
TH0034
2 Speed Hydraulic Crimper
9
6 AWG to 750 MCM
12 Ton Crimping Force
12 Die Sets
TH0037
Hydraulic Knockout Punch
5
1/2" to 4" Punch Set
13 US Tons
5 Year Warranty
Shipping
Domestic
Lower 48 States:
FREE!
Local Pickup Available:
FREE!*
International
Canada & Mexico:
Other Destinations:**
Orders are usually processed and shipped within 24 to 48 hours of receipt of your payment. Please provide us with a physical shipping address (failing to do so may delay your order). We may ship an order by a different courier at our discretion. If you need to receive an order within a guaranteed time frame, please contact us for rush options and expedited shipping.
Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Furthermore, we will not mark merchandise values below value or mark items as "Gifts".
*Local Pick Up
is available at our Fremont CA location, Monday through Friday 9:00 a.m. to 5:00 p.m. Please contact us ahead to ensure that your item is in stock at our location before pick-up.
** International Buyers, Please Note:
If shipping for your country is not listed,
contact us
for details.
Payment & Returns
Payment
TEMCo accepts the following payment methods: PayPal, Visa, MasterCard, AMEX, Discover.
We charge 9.75% sales tax for all orders shipping within California. Tax exemption is available if we are provided with a valid California resale certificate.
Returns
TEMCo allows for the return of new and unused products in original factory condition and used defective products for 30 days from the date of purchase. Returns must be pre-approved by TEMCo and have a return merchandise authorization (RMA) number issued by TEMCo. Unauthorized returns will not be accepted.
We recommend using a shipping carrier with online tracking and insurance. TEMCo will replace the item with an identical item, issue a full store credit for the value of the item, or issue a refund for the value of the item, minus a 20% restocking fee. Items with a 100% satisfaction guarantee are exempt from the 20% restocking fee.
Customer feedback
We strive to provide 5-star service. Shop with confidence!
100% Positive reviews
We want nothing more for our buyers than to be 100% happy with their purchase. We strive to earn a 5-star rating from every purchase. When you receive your purchase, please take a moment to leave us a positive feedback. If there was something unsatisfactory about your purchase, please
contact us
before leaving feedback and we'll do what's necessary to remedy the problem and ensure your satisfaction!
When your order ships from our warehouse, we will automatically leave you positive feedback.
"I have always been delighted with the service from TEMCo."
Your customer service, which is seldom needed, is wonderful, the staff knowledgeable and courteous. The shipping has been quite fast, which make my life easier... So, thank you, for the good experiences with the company!
Rick C
"I have ordered from TEMCo several times over the last 2 years and have always found the process to be simple and quick."
Making the order takes only a few moments, the product is always high quality and the shipping fast.
Glen B
"Thank you for a very satisfying and honest transaction."
It is really great to deal with a company that does exactly what they advertise. I can truly say I would recommend your company to anyone interested in the equipment you sell.
Paul Gilley
"The service was awesome."
I  had many tech questions, and they spent about 30 mins on the phone answering all of them for me. It is not to often to find service like that!!!!! I am so happy and will definitly purchase from them again. A+++++
MRZ Contracting
Still not sure about us?
Check us out on the
Better Business Bureau
and
Reseller Ratings
, or look at our
eBay seller ratings
with a perfect score in all categories.
View our other products
Battery Link Cables
Motor Capacitors
Electric Motors
Lighting
magnet wire
motor starters
Phase converters
raw material
resistance wire
ring terminals
SO Cord
Solar Tools & Hardware
switches & Relays
tools
valves
drives
welding cable
About TEMCo
Since 1968, TEMCo has become a trusted name in industrial power products.
TEMCo products meet the demands of tough industrial applications with dependability and quality. We are proud to be an accredited member of the Better Business Bureau Online Reliability Program. Some of our customers include:
TEMCo Industrial
Sales, Manufacturing & Distribution
48621 Warm Springs Blvd
Fremont, CA 94539
Contact us
Send us a Message